12 bolt car rearend and parts

Discussion in 'For Sale/Wanted' started by dave brode, Jan 11, 2018.

  1. dave brode

    dave brode Well-Known Member

    Joined:
    Oct 14, 2004
    Messages:
    14,798
    Likes Received:
    95
    Location:
    Frostburg, Maryland
    '68 chevelle housing, rusty but not deeply pitted.
    Stock axles
    Back plates, brakes and drums [v-good]

    If I would put it together with the 3.55s and posi, pretty it all up, it would probably bring $1200-$1500. I will sell it in pieces cheap compared to that.

    3 series car posi
    4 series car posi
    3.55-1 GM gears
    4.10 GM gears
    4.30 gears
    4.56 gears
    4.88 gears.

    I probably would not sell the 3.55s or the 3 series posi until the chevelle rear is sold.

    -----

    Impala 12 bolt housing, rusty, not bad inside, would be good to narrow.

    --------

    I had the parts below for my Opel, but I decided to use a Dana 60 in my Opel.

    Narrowed 12 bolt, ends not welded on yet.
    New Strange ends for 3.150" Ford bearings. No c-clips or c-clip eliminators needed. Stock brakes will work.
    33 spline moser axles [new].
    Would finish between 41 and 43" drum to drum
    Strange 4 series spool, used v-good.
    Bearing and gear install kit. new, unopened.
    Strange 1350 yoke new.

    Will sell the narrowed rear complete, assembled or unassembled, or pieces/parts.

    I can weld ends on for desired width [with narrowing fixture]

    PM - REAPEAT - PM me if interested.

    thanks.
    Dave
     
  2. bugzaper

    bugzaper Well-Known Member

    Joined:
    Nov 23, 2005
    Messages:
    1,508
    Likes Received:
    36
    $1200-$1300 is a "Great Deal" and is about what I paid for my last complete "12-bolt" rear-end with a "Moser Brute Strength" posi. carrier from "Mark Williams" almost 20 years ago.
     
  3. dave brode

    dave brode Well-Known Member

    Joined:
    Oct 14, 2004
    Messages:
    14,798
    Likes Received:
    95
    Location:
    Frostburg, Maryland
    I will sell the chevelle rear in a basket incl housing, axles, brakes, posi and 4.56 or 4.88s for $800, with 4.30s or 4.10s for $850. $900 with 3.55s. The housing would need blasted.
     

Share This Page